Private-Vlan Synchronize - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 2 Ethernet Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

private-vlan synchronize

To map the secondary VLANs to the same MST instance as the primary VLAN, use the private-vlan
synchronize command.
Syntax Description This command has no keywords or arguments.
Command Default
None
Command Modes
MST configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
If you do not map secondary VLANs to the same MST instance as the associated primary VLAN when
you exit the MST configuration mode, the device displays a warning message that lists the secondary
VLANs that are not mapped to the same instance as the associated VLAN. The private-vlan
synchronize command automatically maps all secondary VLANs to the same instance as the associated
primary VLANs.
Examples This example shows how to initialize PVLAN synchronization:
switch(config)# spanning-tree mst configuration
switch(config-mst)# private-vlan synchronize
Related Commands Command
show spanning-tree
mst configuration
spanning-tree mst
configuration
OL-16599-01
private-vlan synchronize
Modification
This command was introduced.
Description
Displays information about the MST protocol.
Enters MST configuration mode.
Cisco Nexus 5000 Series Command Reference
private-vlan synchronize
2-43