Show Ntp Statistics - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 7 System Management Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show ntp statistics

To display Network Time Protocol (NTP) statistics, use the show ntp statistics command.
Syntax Description
io
local
memory
peer
ipaddr address
name name1 [..nameN] Displays statistics for one or more named peers.
Command Default None
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example displays statistics for NTP:
switch(config)# show ntp statistics local
Related Commands Command
clear ntp statistics
OL-16599-01
show ntp statistics {io | local | memory | peer {ipaddr address | name name1 [..nameN]}
Show the input-output statistics.
Show the counters maintained by the local NTP.
Show the statistics counters related to memory code.
Show the per-peer statistics counter of a peer.
Displays statistics for the peer with the configured IPv4 or IPv6 address. The
IPv4 address format is dotted decimal, x.x.x.x. The IPv6 address format is
hexadecimal A:B::C:D.
Modification
This command was introduced.
Description
Clears NTP statistics
Cisco Nexus 5000 Series Command Reference
show ntp statistics
7-43