Port-Security Commit - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

port-security commit

To apply the pending configuration pertaining to the port security Cisco Fabric Services (CFS)
distribution session in progress in the fabric, use the port-security commit command.
Syntax Description vsan vsan-id
Command Default
None
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples
The following example shows how to commit changes to the active port security configuration:
switch(config)# port-security commit vsan 13
Related Commands Command
port-security
distribute
show port-security
OL-16599-01
port-security commit vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Enables CFS distribution for port security.
Displays port security information.
Cisco Nexus 5000 Series Command Reference
port-security commit
8-111