Send - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

send

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
send
To send a message to the active user sessions, use the send command.
Syntax Description
session line
text
Command Default Sends a message to all active user sessions.
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines You can use the show users command to display information about the active user sessions.
Examples This example shows how to send a message to all active user sessions on the switch:
switch# send The system will reload in 15 minutes!
The system will reload in 15 minutes!
This example shows how to send a message to a specific user session:
switch# send session pts/0 You must log off the switch.
Related Commands Command
show users
Cisco Nexus 5000 Series Command Reference
1-70
send [session line] text
(Optional) Specifies a user session.
Text string. The text string can be up to 80 alphanumeric characters and is
case sensitive.
Modification
This command was introduced.
Description
Displays the active user sessions on the switch.
Chapter 1 Basic System Commands
OL-16599-01