Svi Enable - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 2 Ethernet Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

svi enable

To enable the creation of VLAN interfaces, use the svi enable command. To disable the VLAN interface
feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default VLAN interfaces are disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
4.0(1a)N1(1)
Usage Guidelines
You must use the
interfaces.
Examples This example shows how to enable the interface VLAN feature on the switch:
switch(config)# svi enable
Related Commands Command
interface vlan
OL-16599-01
svi enable
no svi enable
Modification
This command was introduced.
This command was deprecated and replaced with the
command. For backwards compatibility, it will be maintained for a number
of releases.
feature interface-vlan
Description
Creates a VLAN interface.
or the svi enable command before you can create VLAN
Cisco Nexus 5000 Series Command Reference
svi enable
feature interface-vlan
2-91