Zone Compact - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

zone compact

To compact a zone database in a VSAN, use the zone compact command.
Syntax Description
vsan vsan-id
Command Default None
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines 8000 zones are supported in a Cisco Nexus 5000 Series switch.
If you attempt to merge VSANs, the merge will fail if more than 2000 zones are present in a VSAN and
the neighboring VSAN cannot support more than 2000 zones.
Activation will fail if more than 2000 zones are present in the VSAN and one or more switches in the
fabric cannot support more than 2000 zones.
Examples The following example shows how to compact a zone database in VSAN 1:
switch(oongif)# zone compact vsan 1
Related Commands Command
show zone
show zone analysis
OL-16599-01
zone compact vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays zone information.
Displays detailed analysis and statistical information about the zoning
database.
Cisco Nexus 5000 Series Command Reference
zone compact
8-147