Fcdomain Distribute - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fcdomain distribute

To enable fabric distribution using Cisco Fabric Services (CFS), use the fcdomain distribute command.
To disable fabric distribution using CFS, us the no form of the command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples The following example enables fabric distribution using CFS:
switch(config)# fcdomain distribute
The following example disables fabric distribution using CFS:
switch(config)# no fcdomain distribute
Related Commands Command
fcdomain
show fcdomain
OL-16599-01
fcdomain distribute
no fcdomain distribute
Modification
This command was introduced.
Description
Configures Fibre Channel domain features.
Displays global information about the Fibre Channel domain configurations.
Cisco Nexus 5000 Series Command Reference
fcdomain distribute
8-51