Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual page 285

Chapter 3 Ethernet Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
This example shows how to display STP information about specified MST interfaces:
switch)# show spanning-tree mst interface ethernet 8/2
This example shows how to display information about the MST configuration:
switch)# show spanning-tree mst configuration
This example shows how to display the MD5 digest included in the current MST configuration:
switch)# show spanning-tree mst configuration digest
See
spanning-tree commands.
Related Commands Command
show spanning-tree
show spanning-tree
active
show spanning-tree
bridge
show spanning-tree
brief
show spanning-tree
detail
show spanning-tree
interface
show spanning-tree
root
show spanning-tree
summary
show spanning-tree
vlan
OL-16599-01
Table 3-1 on page 3-19 for descriptions of the fields that are displayed in the output of show
Description
Displays information STP.
Displays information about STP active interfaces only.
Displays bridge ID, timers, and protocol for the local bridge on the switch.
Displays brief summary information about STP.
Displays detailed information about STP.
Displays STP interface status and configuration of specified interfaces.
Displays status and configuration of the root bridge for the STP instance to
which this switch belongs.
Displays summary information about STP.
Displays STP information for specified VLANs.
Cisco Nexus 5000 Series Command Reference
show spanning-tree mst
3-29