Spanning-Tree Mst Forward-Time - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 2 Ethernet Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

spanning-tree mst forward-time

To set the forward-delay timer for all the instances on the switch, use the spanning-tree mst forward-time
command. To return to the default settings, use the no form of this command.
Syntax Description
seconds
Command Default
15 seconds.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to set the forward-delay timer:
switch(config)# spanning-tree mst forward-time 20
Related Commands Command
show spanning-tree
mst
OL-16599-01
spanning-tree mst forward-time seconds
no spanning-tree mst forward-time
Number of seconds to set the forward-delay timer for all the instances on the
switch; the range of valid values is from 4 to 30 seconds.
Modification
This command was introduced.
Description
Displays the information about the MST protocol.
spanning-tree mst forward-time
Cisco Nexus 5000 Series Command Reference
2-61