Feature Tacacs - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

feature tacacs+

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
feature tacacs+
To enable TACACS+, use the feature tacacs+ command. To disable TACACS+, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines You must use the feature tacacs+ command before you configure TACACS+.
When you disable TACACS+, the Cisco NX-OS software removes the TACACS+ configuration.
Note
Examples This example shows how to enable TACACS+:
switch(config)# feature tacacs+
This example shows how to disable TACACS+:
switch(config)# no feature tacacs+
Related Commands Command
show tacacs+
Cisco Nexus 5000 Series Command Reference
1-42
feature tacacs+
no feature tacacs+
Modification
This command was introduced.
Description
Displays TACACS+ information.
Chapter 1 Basic System Commands
OL-16599-01