Ssh Server Enable - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

ssh server enable

To enable the Secure Shell (SSH) server, use the ssh server enable command. To disable the SSH server,
use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Enabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines The switch supports SSH version 2.
Examples This example shows how to enable the SSH server:
switch(config)# ssh server enable
This example shows how to disable the SSH server:
switch(config)# no ssh server enable
Related Commands Command
show ssh server
OL-16599-01
ssh server enable
no ssh server enable
Modification
This command was introduced.
Description
Displays the SSH server key information.
Cisco Nexus 5000 Series Command Reference
ssh server enable
6-131