Fcns No-Auto-Poll - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

fcns no-auto-poll

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
fcns no-auto-poll
To enable or disable automatic polling in the name server database, use the fcns no-auto-poll command.
Syntax Description
vsan vsan-id
wwn wwn-id
Command Default None
Command Modes
Configuration mode
Command History Release
4.0(0)N1(1a)
Examples The following example shows how to disable automatic polling for VSAN 2:
switch(config)# fcns no-auto-poll vsan 2
Related Commands Command
show fcns
Cisco Nexus 5000 Series Command Reference
8-58
fcns no-auto-poll [vsan vsan-id] | [wwn wwn-id]
no fcns no-auto-poll [vsan vsan-id] | [wwn wwn-id]
(Optional) Specifies a VSAN ID. The range is 1 to 4093.
(Optional) Specifies the port WWN, with the format
hh:hh:hh:hh:hh:hh:hh:hh.
Modification
This command was introduced.
Description
Displays the name server database and statistical information for a specified
VSAN or for all VSANs.
Chapter 8 Fibre Channel Commands
OL-16599-01