Show Rlir - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show rlir

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show rlir
To display Registered Link Incident Report (RLIR) information, use the show rlir command.
Syntax Description erl
vsan vsan-id
history
recent
interface fc slot/port
portnumber port
statistics
Command Default
None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples
The following example displays RLIR information for VSAN 1:
switch# show rlir erl vsan 1
The following example displays RLIR statistics:
switch# show rlir statistics vsan 1
Cisco Nexus 5000 Series Command Reference
9-40
show rlir {erl [vsan vsan-id] | history | recent {interface fc slot/port | portnumber port} |
statistics [vsan vsan-id]}
Displays the Established Registration List.
(Optional) Specifies a VSAN ID. The range is 1 to 4093.
Displays the link incident history.
Displays recent link incidents.
Specifies a Fibre Channel interface.
Displays RLIR information for the specified port number.
Displays RLIR statistics for all VSANs or the specified VSAN.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01