Show Processes Cpu - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show processes cpu

To display the CPU utilization information for processes on the device, use the show processes cpu
command.
Syntax Description This command has no arguments or keywords.
Command Default
Displays information for all processes in the local device.
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display the CPU utilization information for the processes:
switch# show processes cpu
Related Commands Command
show processes
show processes log
show processes
memory
OL-16599-01
show processes cpu
Modification
This command was introduced.
Description
Displays the process information for the switch.
Displays the contents of the process log.
Displays the memory allocation information for processes.
Cisco Nexus 5000 Series Command Reference
show processes cpu
1-95