Copy Running-Config Startup-Config - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

copy running-config startup-config

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
copy running-config startup-config
To save the running configuration to the startup configuration file so that all current configuration details
are available after a reboot, use the copy running-config startup-config command. Once this command
is entered, the running and the startup copies of the configuration are identical.
Syntax Description This command has no additional arguments or keywords.
Command Default None
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
To view the changes to the configuration that you have made, use the show startup-config command.
Examples
The following example shows saving the running configuration to the startup configuration:
switch# copy running-config startup-config
Related Commands Command
show running-config
show startup-config
Cisco Nexus 5000 Series Command Reference
1-24
copy running-config startup-config
Modification
This command was introduced.
Description
Displays the currently running configuration.
Displays the startup configuration file.
Chapter 1 Basic System Commands
OL-16599-01