Description (Fex) - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

description (fex)

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
description (fex)
To specify a description for a Fabric Extender, use the description command. To revert to the default
description, use the no form of this command.
Syntax Description
description
Command Default
None
Command Modes Fabric Extender configuration mode
Command History Release
4.0(1a)N2(1)
Examples
This example shows how to specify a description for a Fabric Extender:
switch# configure terminal
switch(config)# fex 101
switch(config-fex)# description Rack16_FEX101
This example shows how to revert to the default description for a Fabric Extender:
switch# configure terminal
switch(config)# fex 101
switch(config-fex)# no description
Related Commands Command
fex
show fex
Cisco Nexus 5000 Series Command Reference
4-4
description description
no description
Description of a Fabric Extender. The default is the string FEXxxxx where
xxxx is the chassis ID. For example, if the chassis ID is 123, the default
description is FEX0123. The maximum length is 20 characters.
Modification
This command was introduced.
Description
Creates a Fabric Extender and enters Fabric Extender configuration mode.
Displays all configured Fabric Extender chassis connected to the switch.
Chapter 4 Fabric Extender Commands
OL-16599-01