Fabric-Binding Database Copy - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Fibre Channel Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fabric-binding database copy

To copy from the active fabric binding database to the configuration fabric binding database, use the

fabric-binding database copy command.

Syntax Description

vsan vsan-id

Command Default

Command Modes

Command History

4.0(0)N1(1a)

Usage Guidelines

Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and

Fibre Channel VSANs.

If the configured database is empty, this command is not accepted.

The following example copies from the active database to the configuration database in VSAN 1:

switch# fabric-binding database copy vsan 1

Related Commands

fabric-binding diff

fabric-binding database copy vsan vsan-id

Specifies the VSAN. The ID of the VSAN is from 1 to 4093.

Modification

This command was introduced.

Provides the differences between the fabric-binding databases.

Cisco Nexus 5000 Series Command Reference

fabric-binding database copy