Show Logging Onboard - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show logging onboard

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show logging onboard
To display the onboard logging information based on the error type, use the show logging onboard
command.
Syntax Description boot-uptime
device-version
endtime
environmental-history Displays the OBFL environmental history.
exception-log
kernel-trace
obfl-history
obfl-logs
stack-trace
starttime
status
> file
| type
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines The date and time arguments for the starttime and endtime keywords are entered as the date
month/day/year (mm/dd/yy), followed by a hyphen, and the time in 24-hour format in
hours:minutes:seconds (HH:MM:SS). For example:
•
•
The valid values for file are as follows:
Cisco Nexus 5000 Series Command Reference
7-32
show logging onboard {boot-uptime | device-version | endtime | environmental-history |
exception-log | kernel-trace | obfl-history | obfl-logs | stack-trace | starttime | status} [> file
| | type]
Displays the OBFL boot and uptime information.
Displays the OBFL device version information.
Displays the OBFL logs until the specified end time.in the following format:
mm/dd/yy-HH:MM:SS
Displays the OBFL exception log.
Displays the OBFL kernel trace information.
Displays the OBFL history information.
Displays the OBFL technical support log information.
Displays the OBFL kernel stack trace information.
Displays the OBFL logs from the specified start time in the following
format: mm/dd/yy-HH:MM:SS
Displays the OBFL status enable or disable.
(Optional) Redirects the output to a file. See the "Usage Guidelines" section
for additional information.
(Optional) Filters the output. See the "Usage Guidelines" section for
additional information.
Modification
This command was introduced.
starttime 03/17/08-15:01:57
endtime 03/18/08-15:04:57
Chapter 7 System Management Commands
OL-16599-01