Device-Alias Import Fcalias - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

device-alias import fcalias

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
device-alias import fcalias
To import device alias database information from another VSAN, use the device-alias import fcalias
command. To revert to the default configuration or factory defaults, use the no form of the command.
Syntax Description
vsan vsan-id
Command Default None
Command Modes Configuration mode
Command History Release
Release 4.0
Usage Guidelines You can import legacy device name configurations using this feature without losing data, if they satisfy
the following restrictions:
•
•
If any name conflict exists, the fcaliases are not imported. The device name database is completely
independent from the VSAN dependent fcalias database.
When the import operation is complete, the modified global fcalias table can distributed to all other
switches in the physical fabric using the device-alias distribute command so that new definitions are
available everywhere.
Examples The following example shows how to import device alias information:
switch(config)# device-alias import fcalias vsan 10
Related Commands Command
device-alias database
device-alias distribute Distributes fcalias database changes to the fabric.
show device-alias
Cisco Nexus 5000 Series Command Reference
8-30
device-alias import fcalias vsan vsan-id
no device-alias import fcalias vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Each fcalias has only one member.
The member type is supported by the device name implementation.
Description
Configures and activates the device alias database.
Displays device alias database information.
Chapter 8 Fibre Channel Commands
OL-16599-01