Show Port Index-Allocation - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show port index-allocation

To display port index allocation information, use the show port index-allocation command.
Syntax Description
startup
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
On a switch where the maximum number of port indexes is 256, any module that exceeds that limit does
Note
not power up. There is no startup module index distribution for the Cisco Nexus 5000 Series switch.
Examples The following example displays port index allocation information:
switch# show port index-allocation
OL-16599-01
show port index-allocation [startup]
(Optional) Displays port index allocation information at startup.
Modification
This command was introduced.
show port index-allocation
Cisco Nexus 5000 Series Command Reference
9-37