Show Policy-Map - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show policy-map

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show policy-map
To display policy maps and statistics, use the show policy-map command.
Syntax Description
type
qos
queuing
policy-map-name
Defaults None.
Command Modes
Any command mode
Command History Release
4.1(3)N1(1)
Usage Guidelines
When you enter the command show policy-map with no arguments or keywords, the system also
displays the Control Plane Policing (CoPP) information.
This command does not require a license.
Examples
This example shows how to display a named policy map:
switch(config)# show policy-map abc
switch(config)# show policy-map type queuing
Related Commands Command
class-map
Cisco Nexus 5000 Series Command Reference
5-22
show policy-map [type {qos | queuing|network-qos}] [policy-map-name]
(Optional) Specifies the component type to display.
Displays policy maps of type qos only.
Displays policy maps of type queuing only.
(Optional) Displays a named policy map.
Modification
This command was introduced.
Description
Creates or modifies a class map.
Chapter 5 Quality of Service Commands
OL-16599-01