Show Class-Map Type Qos - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show class-map type qos

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show class-map type qos
To display type qos class maps, use the show class-map type qos command.
Syntax Description
class-map-name
color-class-map-name
Defaults Displays all type qos class maps if no class map name is specified.
Command Modes Any command mode
Command History Release
4.1(3)N1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display all type qos class maps:
switch(config)# show class-map type qos
Related Commands Command
class-map
Cisco Nexus 5000 Series Command Reference
5-20
show class-map type qos [class-map-name | color-class-map-name]
Named class map. The name class-default is reserved.
System-defined color class map.
Modification
This command was introduced.
Description
Creates or modifies a class map.
Chapter 5 Quality of Service Commands
OL-16599-01