Show Processes - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show processes

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show processes
To display the process information for the switch, use the show processes command.
Syntax Description
vdc vdc-number
Command Default
Displays information for all processes running on the switch.
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display the process information for a device:
switch# show processes
Related Commands Command
show processes cpu
show processes log
show processes
memory
Cisco Nexus 5000 Series Command Reference
1-94
show processes [vdc vdc-number]
(Optional) Displays process information for a specific virtual device context
(VDC). There is only one VDC on a Cisco Nexus 5000 Series switch.
Modification
This command was introduced.
Description
Displays the CPU utilization information for processes.
Displays the contents of the process log.
Displays the memory allocation information for processes.
Chapter 1 Basic System Commands
OL-16599-01