Show Spanning-Tree Detail - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 3 Ethernet Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show spanning-tree detail

To display detailed information on the STP status and configuration on the switch, use the show
spanning-tree detail command.
Syntax Description active
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display detailed information on the STP configuration:
switch(config)# show spanning-tree detail
Related Commands Command
show spanning-tree
show spanning-tree
active
show spanning-tree
bridge
show spanning-tree
brief
show spanning-tree
interface
show spanning-tree
mst
show spanning-tree
root
show spanning-tree
summary
show spanning-tree
vlan
OL-16599-01
show spanning-tree detail [active]
(Optional) Displays information about STP active interfaces only.
Modification
This command was introduced.
Description
Displays information STP.
Displays information about STP active interfaces only.
Displays bridge ID, timers, and protocol for the local bridge on the switch.
Displays brief summary information about STP.
Displays STP interface status and configuration of specified interfaces.
Displays information about MST STP.
Displays status and configuration of the root bridge for the STP instance to
which this switch belongs.
Displays summary information about STP.
Displays STP information for specified VLANs.
show spanning-tree detail
Cisco Nexus 5000 Series Command Reference
3-25