San-Port-Channel Persistent - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

san-port-channel persistent

To convert an autocreated SAN port channel to a persistent SAN port channel, use the san-port-channel
persistent command.
Syntax Description port-channel-id
persistent
Command Default None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines This command is not reversible. A user-created channel group cannot be converted to an autocreated
channel group.When the san-port-channel persistent command is applied to an autocreated channel
group, the channel group number does not change and the member ports properties change to those of a
user-created channel group. The channel mode remains active.
Examples
The following example shows how to change the properties of an autocreated channel group to a
persistent channel group:
switch# san-port-channel 10 persistent
Related Commands Command
san-port-channel
protocol
show interface
port-channel
show port-channel
OL-16599-01
san-port-channel port-channel-id persistent
Specifies the port channel ID. The range is 1 to 128.
Converts the autocreated SAN port channel to a persistent SAN port channel
Modification
This command was introduced.
Description
Enables the SAN port channel protocol.
Displays SAN port channel interface information.
Displays SAN port channel information.
san-port-channel persistent
Cisco Nexus 5000 Series Command Reference
8-127