Role Name - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

role name

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
role name
To create or specify a user role and enter user role configuration mode, use the role name command. To
delete a user role, use the no form of this command.
Syntax Description
role-name
Command Default
None
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines A Cisco Nexus 5000 Series switch provides the following default user roles:
•
•
You cannot change or remove the default user roles.
Examples This example shows how to create a user role and enter user role configuration mode:
switch(config)# role MyRole
switch(config-role)#
This example shows how to remove a user role:
switch(config)# no role name MyRole
Related Commands Command
show role
Cisco Nexus 5000 Series Command Reference
6-92
role name role-name
no role name role-name
User role name. The role-name has a maximum length of 16 characters and
is a case-sensitive, alphanumeric character string.
Modification
This command was introduced.
Network Administrator—Complete read-and-write access to the entire switch
Complete read access to the entire switch
Description
Displays the user roles.
Chapter 6 Security Commands
OL-16599-01