Show Fc2 - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show fc2

To display FC2 information, use the show fc2 command.
Syntax Description bind
classf
exchange
exchresp
flogi
nport
plogi
plogi_pwwn
port
brief
socket
sockexch
socknotify
socknport
vsan
Command Default None
Command Modes
EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples The following example displays FC2 active socket information:
switch# show fc2 socket
The following example displays FC2 socket binding information:
switch# show fc2 bind
The following example displays FC2 local N port information:
switch# show fc2 nport
OL-16599-01
show fc2 {bind | classf | exchange | exchresp | flogi | nport | plogi | plogi_pwwn | port [brief] |
socket | sockexch | socknotify | socknport | vsan}
Displays FC2 socket bindings.
Displays FC2 classf sessions.
Displays FC2 active exchanges.
Displays FC2 active responder exchanges.
Displays FC2 FLOGI table.
Displays FC2 local N ports.
Displays FC2 PLOGI sessions.
Displays FC2 PLOGI pWWN entries.
Displays FC2 physical port table.
Displays FC2 physical port table in brief format.
Displays FC2 active sockets.
Displays FC2 active exchanges for each socket.
Displays FC2 local N port PLOGI/LOGO notifications for each socket.
Displays FC2 local nports per each socket.
Displays FC2 VSAN table.
Modification
This command was introduced.
Cisco Nexus 5000 Series Command Reference
show fc2
9-9