Chapter 8
Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
fabric-binding enable
To enable fabric binding in a VSAN, use the fabric-binding enable command. To disable fabric binding,
use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Command Default
Disabled.
Command Modes
Configuration mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
Fabric binding is configured on a per-VSAN basis.
The fabric binding feature must be enabled in each switch in the fabric that participate in the fabric
binding.
Examples
The following example enables fabric binding on that switch:
switch(config)# fabric-binding enable
The following example disables fabric binding on that switch:
switch(config)# no fabric-binding enable
Related Commands
Command
fabric-binding activate
fabric-binding database
OL-16599-01
fabric-binding enable
no fabric-binding enable
Modification
This command was introduced.
Description
Activates fabric-binding.
Configures a fabric-binding database.
Cisco Nexus 5000 Series Command Reference
fabric-binding enable
8-43