Show File - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show file

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show file
To display the contents of a file on the local memory, use the show file command.
Syntax Description
filesystem:
//server/
directory
filename
There can be no spaces in the filesystem://server/directory/filename string. Individual elements of this
Note
string are separated by colons (:) and slashes (/).
Command Default None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to display the contents of a file:
switch# show file ent-mod.lic
If the file that you want to display is a directory, the command will return an error message:
switch# show file bootflash:///routing-sw
/bin/showfile: /bootflash/routing-sw: Is a directory
Related Commands Command
cd
dir
pwd
Cisco Nexus 5000 Series Command Reference
1-82
show file [filesystem:] [//server/] [directory] filename
(Optional) Name of the file system. Valid values are bootflash, modflash,
or volatile.
(Optional) Name of the server. Valid values are ///, //module-1/, //sup-1/,
//sup-active/, or //sup-local/. The double slash (//) is required.
(Optional) Name of a directory. The directory name is case sensitive.
Name of the file to delete. The filename is case sensitive.
Modification
This command was introduced.
Description
Changes the current working directory.
Displays the directory contents.
Displays the name of the current working directory.
Chapter 1 Basic System Commands
OL-16599-01