Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual page 337

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Quality of Service Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

This command does not require a license.

This example shows how to attach qos type policy maps to the ingress and egress packets of a VLAN:

switch(config)# vlan 1

switch(config-vlan)# service-policy input my_input_policy

switch(config-vlan)# service-policy output my_output_policy

switch(config-vlan)#

This example shows how to attach a queuing policy map to the ingress packets of a port interface:

switch(config)# interface ethernet 2/1

switch(config-if)# service-policy type queuing input my_input_q_policy

switch(config-if)#

This example shows how to remove a policy map from a VLAN:

switch(config)# vlan 1

switch(config-vlan)# no service-policy input my_input_policy

switch(config-vlan)#

Related Commands

show policy-map

interface brief

Displays all interfaces and VLANs with attached service policies in a brief

Cisco Nexus 5000 Series Command Reference

service-policy