Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual page 619

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Fibre Channel Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

The following example configures the use of only the SHA-1 hash algorithm:

switch(config)# fcsp dhchap hash sha1

The following example configures the use of only the MD-5 hash algorithm:

switch(config)# fcsp dhchap hash md5

The following example defines the use of the default hash algorithm priority list of MD-5 followed by

SHA-1 for DHCHAP authentication:

switch(config)# fcsp dhchap hash md5 sha1

The following example reverts to the factory default priority list of the MD-5 hash algorithm followed

by the SHA-1 hash algorithm:

switch(config)# no fcsp dhchap hash sha1

The following example prioritizes the use of DH group 2, 3, and 4 in the configured order:

switch(config)# fcsp dhchap group 2 3 4

The following example configures a clear text password for the local switch:

switch(config)# fcsp dhchap password 0 mypassword

The following example configures a clear text password for the local switch to be used for the device

with the specified WWN:

switch(config)# fcsp dhchap password 0 mypassword 30:11:bb:cc:dd:33:11:22

The following example configures a password entered in an encrypted format for the local switch:

switch(config)# fcsp dhchap password 7 sfsfdf

Related Commands

Enable FC-SP.

Displays configured FC-SP information.

Cisco Nexus 5000 Series Command Reference