Show Debug Npv - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show debug npv

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show debug npv
To display the N Port Virtualization (NPV) debug commands configured on the switch, use the show
debug npv command.
Syntax Description This command has no other keywords or arguments.
Command Default
None
Command Modes
EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines
The show debug npv command is available only when the switch is in NPV mode.
Examples The following example shows all the NPV debug commands available on the switch:
switch# show debug npv
Related Commands Command
debug npv
Cisco Nexus 5000 Series Command Reference
9-4
show debug npv
Modification
This command was introduced.
Description
Enables debugging NPV configurations.
Chapter 9 Fibre Channel Show Commands
OL-16599-01