Zone Merge-Control Restrict Vsan - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

zone merge-control restrict vsan

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
zone merge-control restrict vsan
To restrict zone database merging, use the zone merge-control restrict vsan command. To disable this
feature, use the no form of the command.
Syntax Description
vsan vsan-id
Command Default Disabled.
Command Modes Configuration mode
Command History Release
Release 4.0
Usage Guidelines If merge control is set to restricted and the two databases are not identical, the merge fails and ISLs
between the switches become isolated.
Examples The following example shows how to set zone merge control for VSAN 10 to restricted:
switch(config)# zone merge-control restrict vsan 10
Related Commands Command
show zone
Cisco Nexus 5000 Series Command Reference
8-150
zone merge-control restrict vsan vsan-id
no zone merge-control restrict vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays zone information.
Chapter 8 Fibre Channel Commands
OL-16599-01