Chapter 6
Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
aaa authentication login error-enable
To configure that the AAA authentication failure message displays on the console, use the aaa
authentication login error-enable command. To revert to the default, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled.
Command Modes
Configuration mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
When you log in, the login is processed by rolling over to the local user database if the remote AAA
servers do not respond. In this situation, the following message is displayed if you have enabled the
displaying of login failure messages:
Remote AAA servers unreachable; local authentication done.
Remote AAA servers unreachable; local authentication failed.
Examples
This example shows how to enable the display of AAA authentication failure messages to the console:
switch(config)# aaa authentication login error-enable
This example shows how to disable the display of AAA authentication failure messages to the console:
switch(config)# no aaa authentication login error-enable
Related Commands
Command
show aaa
authentication
OL-16599-01
aaa authentication login error-enable
no aaa authentication login error-enable
Modification
This command was introduced.
Description
Displays the status of the AAA authentication failure message display.
aaa authentication login error-enable
Cisco Nexus 5000 Series Command Reference
6-7