Show Policy-Map Interface Brief - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show policy-map interface brief

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show policy-map interface brief
To display policy maps applied to interfaces in a brief format, use the show policy-map interface brief
command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Command History Release
4.1(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display assigned policy maps in a brief format:
switch(config)# show policy-map interface brief
Interface/VLAN [Status]:INP QOS
================================================================================
port-channel5
port-channel20
port-channel30
port-channel37
port-channel50
Ethernet2/2
Ethernet2/3
==================================================================================
Related Commands Command
show policy-map
Cisco Nexus 5000 Series Command Reference
5-24
show policy-map interface brief
Modification
This command was introduced.
[Active]:
[Active]:
[Active]:
[Active]:
[Active]:
[Active]:
[Active]:
Description
Displays policy maps and statistics.
Chapter 5
OUT QOS INP QUE
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
default-in-po default-out-p
Quality of Service Commands
OUT QUE
OL-16599-01