Intel® Management Engine Interface (MEI) Subsystem Registers (D22:F0)
23.2.11
CAPP—Capabilities List Pointer Register
(MEI—D22:F1)
Address Offset: 34h
Default Value:
Bit
7:0
23.2.12
INTR—Interrupt Information Register
(MEI—D22:F1)
Address Offset: 3Ch–3Dh
Default Value:
Bit
15:8
7:0
23.2.13
HFS—Host Firmware Status Register
(MEI—D22:F1)
Address Offset: 40h–43h
Default Value:
Bit
31:0
23.2.14
GMES—General ME Status
(MEI—D22:F1)
Address Offset: 48h–4Bh
Default Value:
Bit
31:0
Datasheet
50h
Capabilities Pointer (PTR) — RO. Indicates that the pointer for the first entry in the
capabilities list is at 50h in configuration space.
0100h
Interrupt Pin (IPIN) — RO. This field indicates the interrupt pin the Intel MEI host
controller uses. A value of 1h/2h/3h/4h indicates that this function implements legacy
interrupt on INTA/INTB/INTC/INTD, respectively.
Interrupt Line (ILINE) — R/W. Software written value to indicate which interrupt line
(vector) the interrupt is connected to. No hardware action is taken on this register.
00000000h
Host Firmware Status (HFS) — RO. This register field is used by Firmware to reflect
the operating environment to the host.
00000000h
General ME Status (ME_GS)— RO. This field is populated by ME.
Attribute:
RO
Size:
8 bits
Description
Attribute:
R/W, RO
Size:
16 bits
Description
Attribute:
RO
Size:
32 bits
Description
Attribute:
RO
Size:
32 bits
Description
883