Radius-Server Host; Radius-Server Key; Radius-Server Retransmit; Radius-Server Source-Ip - Dell PowerConnect 6224 Command Line Interface Manual

Radius
Command
aaa accounting network
default start-stop group
radius
auth-port
deadtime
key
msgauth
name
primary
priority
radius-server deadtime

radius-server host

radius-server key

radius-server retransmit

radius-server source-ip

Description
Enables RADIUS accounting on the switch.
Sets the port number for authentication
requests of the designated radius server
Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
Sets the authentication and encryption key
for all RADIUS communications between
the switch and the RADIUS daemon
Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
Assigns a name to a RADIUS server.
Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
Specifies the order in which the servers are to be
used, with 0 being the highest priority.
Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
Specifies a RADIUS server host.
Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
Specifies the number of times the software
searches the list of RADIUS server hosts.
Specifies the source IP address used for
communication with RADIUS servers.
.
.
Command Groups
Mode*
GC
R
R
R
R
R
R
R
GC
GC
GC
GC
GC
81