Radius-Server Key - Dell Networking 7048 Reference Manual

User Guidelines
Radius servers are keyed by the host name, therefore it is advisable to use
unique server host names.
Example
The following example specifies a Radius server host with the following
characteristics:
Server host IP address — 192.168.10.1
console(config)#radius-server host 192.168.10.1

radius-server key

Use the radius-server key command in Global Configuration mode to set the
authentication and encryption key for all Radius communications between
the switch and the Radius server. To reset to the default, use the no form of
this command.
Syntax
radius-server key [
no radius-server key
key-string — Specifies the authentication and encryption key for all Radius
•
communications between the switch and the Radius server. This key must
match the encryption used on the Radius server. (Range: 1-128 characters)
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
738
RADIUS Commands
key-string
]