Radius-Server Key - Dell Z9500 Reference Manual

Usage
To configure any number of RADIUS server hosts for each server host that is
Information
configured, use this command. The system searches for the RADIUS hosts in the
order they are configured in the software.
The global default values for the timeout, retransmit, and key optional
parameters are applied, unless those values are specified in the radius-server
host or other commands. To return to the global default values, if you configure
the timeout, retransmit, or key values, include those keywords when using the
no radius-server host command syntax.
Related
login authentication
Commands

radius-server key

radius-server retransmit
send information.
radius-server timeout
radius-server key
Configure a key for all RADIUS communications between the switch and the RADIUS host server.
Z9500
Syntax
radius-server key [encryption-type] key
To delete a password, use the no radius-server key command.
Parameters
encryption-
type
key
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Security
— sets the database to be checked when a user logs in.
— sets an authentication key for RADIUS communications.
— sets the number of times the RADIUS server attempts to
— sets the time interval before the RADIUS server times out.
(OPTIONAL) Enter either zero (0) or 7 as the encryption type
for the key entered. The options are:
• 0 is the default and means the key is not encrypted and
stored as clear text.
• 7 means that the key is encrypted and hidden.
Enter a string that is the key to be exchanged between the
switch and RADIUS servers. It can be up to 42 characters
long.
1587