Disabling Display Of Bgp Logs; Table 48: Show Ip Community-List Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

Meaning

Disabling Display of BGP Logs

Related Topics
Copyright © 2010, Juniper Networks, Inc.
Table 48 on page 205 lists the show ip community-list command output fields.

Table 48: show ip community-list Output Fields

Field Name
Community List 1
permit, deny
To disable the display of information about BGP logs that was previously enabled with
the debug ip bgp command.
Issue the undebug ip bgp command:
host1#undebug ip bgp
Enabling Display of BGP Logs on page 158
debug ip bgp
undebug ip bgp
Field Description
Name of the community list
Condition statement for routes matching the condition
Chapter 2: Monitoring BGP
205