Novell NETWARE 6-DOCUMENTATION Manual page 2514

IPXPING
Purpose
Syntax
Using IPXPING
IPXS
Purpose
Syntax
76
Utilities Reference
Use at the server console to check connectivity to an IPX
internetwork.
[LOAD] IPXPING
IPXPING sends an IPX ping request packet to an IPX target node (server
or workstation). When the target node receives the request packet, it sends
back a reply packet.
To select an IPX server or workstation, enter its IPX internal network
number and node number.
You can also specify the number of seconds between each request packet
transmission.
To start sending request packets, press Esc. The sending node continues
to send request packets and collect response time statistics until you press
Esc again to exit IPXPING.
Request and reply packets use the same format; each packet contains the
standard IPX header.
To add other nodes, press Insert and select another server.
Provides IPX protocol to NLM
TM
IPX.
[LOAD] [path]IPXS [LDFILE = [path]filename[.ext]]
programs that require STREAMS-based
TM
server on your
TM