Novell NETWARE 6-DOCUMENTATION Manual page 2515

Using IPXS
Parameter
path
LDFILE =
[path]\filename[.ext]
NOTE:
The IPXSPX.CFG file is modified from the INETCFG utility when you set
SPX/IPX parameters.
TM
When you load IPXS, STREAMS is autoloaded.
IPXSPX.CFG contains the Service Advertising Protocol (SAP) filtering,
SAP and Router Information Protocol (RIP) timers, and the IPX
configuration defaults.
You can create multiple configuration files in addition to IPXSPX.CFG.
Use this feature if you frequently alternate between two or more IPX/
SPX configurations.
TM
To create multiple configuration files, copy the IPXSPX.CFG file to a
new filename (IPXSPX2.CFG, for example). Then you can change the
IPXSPX.CFG file (by using INETCFG) and still preserve the original
configuration in the IPXSPX2.CFG file.
To load a configuration file other than the default IPXSPX.CFG file, use
the LDFILE option.
For example, if you have a second configuration file called
IPXSPX2.CFG, you can load that configuration by typing
[LOAD] IPXS LDFILE = IPXSPX2
Use to
Specify the path to IPXS.NLM if you moved it
from the default directory.
(Optional) Specify a filename that contains the
SAP filtering, SAP and RIP timers, and IPX
configuration parameters.
Note: If you don't specify a filename, IPXS sets
the parameters defined in the IPXSPX.CFG
file.
If you don't specify a file extension, the default
is .CFG.
For example, to load an alternate configuration
file, type
[LOAD] IPXS LDFILE = IPXSPX2.CFG
77
Utilities