Table of Contents
Advertisement
Wi-Fi
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure a Wi-Fi access point with enterprise security
The WPA2 enterprise security mode allows a Wi-Fi access point to authenticate clients by using one or
more RADIUS servers. When the Wi-Fi access point receives a connection request from a client, it
authenticates the client with the RADIUS server before allowing the client to connect.
Using enterprise security modes allows each client to have different usernames and passwords
configured in the RADIUS server, rather than using preshared key on the Connect EZ device.
By default, the Connect EZ device comes with one preconfigured access point, Digi AP. You cannot
delete default access points, but you can modify them or you can create your own access points.
Required configuration items
Enable the Wi-Fi access point
n
The Service Set Identifier (SSID) for the access point.
n
Configure security for the access point to WPA2 enterprise.
n
The IP address for one or more RADIUS servers.
n
The secret key for one or more RADIUS servers.
n
LAN/bridge assignment. Once you configure a Wi-Fi access point, you must assign the Wi-Fi
n
access point to a LAN interface or to a bridge. See
more information.
Additional configuration items
Determine whether to broadcast the access point's SSID.
n
Determine whether to isolate clients connected to this access point, so that they cannot
n
communicate with each other.
The server port for one or more RADIUS server.
n
The amount of time to wait before changing the group key.
n
To configure a Wi-Fi access point with WPA2 enterprise security:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
Digi Connect EZ 4/4i User Guide
Configure a Wi-Fi access point with enterprise security
Configure a LAN
and
Configure a bridge
for
236
Advertisement
Table of Contents
