Interfaces
Edit the preconfigured ETH2 bridge
Required configuration items
Enable or disable the bridge.
n
Modify the devices included in the bridge.
n
Additional configuration items
Enable Spanning Tree Protocol (STP).
n
To edit the preconfigured LAN bridge:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Bridges > LAN.
4. The LAN bridge is enabled by default. To disable, toggle off Enable.
IX20 User Guide
Use Digi Remote Manager to view and manage your
Bridging
233