188
Figure 11.37: Mainframe Network Setup
A
Optical 10 Gbit NIC1
B
Optical 10 Gbit NIC2
C
Make this the preferred network for connection with Perception
In Mainframe Network Setup you can define the IP address of each individual
interface if needed.
If Perception finds more than one interface for Network Selection as shown in
Figure 11.37, then the interface that has a Check in the box Make this the
preferred network connection with Perception will be the interface used for
communication with Perception. For the 10 Gbit Ethernet card check the box
for the Optical 10 Gbit NIC1 or 2.
Click Apply then Close when done.
Important note Windows
To best achieve the specified 200 MB/s data transfer rating please make sure
the following settings are introduced to your network adaptor via the settings in
Windows.
®
7 - optimum settings
GEN5i
I2679-4.0 en