HBM Genesis GEN5i User Manual page 380

Ordering information
Article
Basic 1 kV ISO Basic 1 kV ISO
2 MS/s
(1) All GEN series systems are intended for exclusive professional and industrial use.
Accessories, to be ordered separately
Article
Test Leads and Test Leads and
clips
BNC to banana BNC to banana
adapter
Artificial
star adapter
Isolated
shielded
test leads
380
(1)
Description
6 channel, 18 bit, 2 MS/s, ± 20 mV to ± 1000 V input range,
2 GB RAM, 1 kV isolated balanced differential input
(600 V RMS CAT II isolation), 4 mm fully isolated banana plugs.
Real time cycle based calculations with triggering on calculated
results
Supported by Perception V6.30 and higher
Description
Black/red lead set 600 V RMS CAT II, 1.5 meter (4.9 ft) with
safety-shrouded banana plugs and alligator clips
Set of six pieces, safety isolated female BNC to dual 4 mm
protected banana adaptor.
1000 V RMS CAT II, 600 V RMS CAT III and 1 A current safety
ratings. Can be used with GN610 and GN611 input cards
The artificial star adapter is a plug-on interface card for
measuring 3 phase signals with the high voltage cards
1-GN610-2 and 1-GN611-2. This card is intended for
measuring 3 phase signals while creating a virtual/artificial star
point
Black/red lead set combined within shielded housing.
600 V RMS CAT II, safety-shrouded stackable banana plugs.
Significantly reduces signal disturbance pickup by using
earthed shield.
Available lengths 1.5 m (4.92 ft), 3.0 m (9.84 ft) and 6.0 m
(19.69 ft)
GEN5i
Order No.
1-GN610-2
Order No.
1-KAB282-1.5
1-G067-2
1-G068-2
1-KAB290-1.5
1-KAB290-3
1-KAB290-6
I2679-4.0 en