E Trouble Shooting; Restoring The Gen5I - HBM Genesis GEN5i User Manual

E Trouble Shooting

534
E.1

Restoring the GEN5i

Your GEN5i comes with a System Image Restore DVD. This DVD contains a
complete software image of the system as delivered.
You might need to restore the original image because Windows won't boot, or
because your system drive died, or for one of a million other possible reasons.
To restore the image proceed as follows:
1 Insert the GEN5i System Image Restore DVD into the DVD drive.
2 Turn on the system and press the F11 key on the keyboard until the Boot
Device selection window is shown.
3
From the list of devices select the MATSHITA DVD-RAM drive and press
the Enter key to continue.
4 When the message "Press any key to boot from CD or DVD" appears,
press the Enter key. The system will now boot from the DVD which will
take a few minutes.
5 When the DVD is booted the following dialog is shown:
Figure E.1: Image restore dialog
Read the text carefully and select the "I understand the consequences"
check box to enable the Yes button. Click Yes to restore the image. To
cancel the process click No. Wait until the image is restored.
GEN5i
I2679-4.0 en