Im2 - Interface/Controller Module Options; Option - Solid State Disk (Ssd) - HBM Genesis GEN5i User Manual

180

IM2 - Interface/Controller Module options

11.5
Your GEN5i data acquisition system can be equipped with a variety of options.
Most options are factory-installed, i.e. you must choose an option at the time of
ordering or return the instrument to a qualified service point for upgrade.
The IM2 Interface/Controller modules of the GEN series mainframe have one
expansion slot that can be used for one of the following options:
Option (for IM2)
SSD (1-G061-2)
SFP 1 Gbit (1-G062-2, 1-G063-2)
10 Gbit Ethernet (1-G064-2)
IRIG (1-G001-2)
IRIG/GPS (1-G002-2)
(1) Factory installed option only.
(2) To complete this option the following is needed SFP+ 10 Gbit (1-G065-2,
1-G066-2)

Option - Solid State Disk (SSD)

11.5.1
This is an on-board factory installed option and needs to be ordered at the time
of purchase.
Figure 11.30: Solid state disk (SSD)
When this option is ordered an SSD is included on board the IM2 ready to be
used when you plug in the IM2 into a mainframe. The SSD is a non-removable
item.
Uses expansion slot
No
No
(2)
Yes
Yes
Yes
GEN5i
(1)
(1)
(1)
(1)
I2679-4.0 en