Closing Accessories Box; Installing Protective Cover - HBM Genesis GEN5i User Manual

94
7.4.3

Closing accessories box

To close accessories box:
1 Put the accessories box on flat surface and put keyboard and mouse inside.
Figure 7.11: Accessories box with mouse and keyboard in it
2 Hold protective cover over the accessories box.
3 Pick up the total and gently push accessories box inside the protective
cover. It will snap into position on left and right sides.
7.4.4

Installing protective cover

To install protective cover:
1 Shut down the GEN5i system and remove the power input cable.
2 Remove all cables from the rear of the instrument and put the instrument
with the display facing up.
3
Turn handle to GEN5i top or bottom so it's not above the display.
4 Put protective cover over GEN5i front.
5 Close the cover latches on both sides as shown on protective cover
instructions.
GEN5i
I2679-4.0 en