HBM Genesis GEN5i User Manual page 343

Power requirement GN112 and GN113 (transmitter)
Power supply
Power consumption
Power supply isolation
Protective ground connected
Protective ground not connected
Fuse(s)
Battery
Battery back-up time
Physical, Weight and Dimensions GN110 and GN111
Weight
Dimensions
Width including handles, etc.
Shielding and casing
Cooling Fans
Handle
Protective ground
Physical, Weight and Dimensions GN112 and GN113
Weight
Dimensions
Width including handles, etc.
Shielding and casing
Cooling Fans
Handle
Protective ground
I2679-4.0 en
115/230 V AC @ 47 - 63 Hz (Manual voltage selector)
12 VA maximum
0 V, both sides grounded
1.8 kV RMS (IEC 61010-1:2010)
Requires a protected LAB environment and EN50191:2000 compliant work procedures
2 x 250 mA; Slow blow
12 V @ 300 mAh; Internal, rechargeable, NiMH
5 minutes (with new and fully charged battery)
4.6 kg (10 lb) including two batteries
175 mm (6.89")
Depth 277 mm (10.91")
Height 119 mm (4.69")
Single metal shielding in plastic housing. Correct operation has been verified by placing the
transmitter cabinet within 1 meter of an EMC field created by a 80 kA current
0
One carrying handle
M6 screw terminal
Figure A.14: Dimensions GN110 and GN111 transmitter
3 kg (6.6 lb)
175 mm (6.89")
Depth 267mm (10.51")
Height 119 mm (4.69")
Single metal shielding in plastic housing. Correct operation has been verified by placing the
transmitter cabinet within 1 meter of an EMC field created by a 80 kA current
1
One carrying handle
M6 screw terminal
GEN5i
343